Edatec IPC2210 based on CM4

DescriptionFeaturesIPC2200 Series FeaturesFunctionsParametersCPUBroadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHzRAM1GB/2GB/4GB/8GB LPDDR4 RAM optionalStorage8GB/16GB/32GB eMMC optional, Support micro-SD Card & MSATA SSDWireless4G/LTE optional, 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLInterface3 x Gigabit Ethernet, 1 x HDMI Type A, 1 x USB 3.0, 2 x USB 2.0, 1 x Micro USBPower InputDC 9V~36V with reverse polarity, overvoltage & overcurrent protection,  3.5mm phoenix connector with screw locked, PoE optionalOtherRTC, Hardware Watch Dog, EEPROM & Crypto authentication, Supercaps backup power supply optional, Reset button,  Audio output & Microphone optional, 4 LED indicatorsOperating Temperature-25℃~60℃Mechanical143mm(W) x 100mm(D) x 35mm(H) 140mm x 100mm x 5mm aluminum heatsink by CNC cut Excellent cooling performance, DIN-rail mounting IPC2200 Series Selection GuideModel No.Audio OutputMicrophoneCSIDSIIPC2210––––IPC2220√√√√Documents DownloadDatasheet DownloadSpecificationsSystemCPUBroadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHzVPUH.265(HEVC), upto 4Kp60 decodeH.264, up to 1080p60 decode, 1080p30 encode)GPUOpenGL ES 3.1 & Vulkan 1.0MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAMStorage– Options for 0GB, 8GB, 16GB, 32GB eMMC storage – Micro SD card (user storage expansion) – PCIe SSD (optional) SoftwareOperating System– Raspberry Pi OS(Desktop) 32-bit– Raspberry Pi OS(Lite) 32-bit– Raspberry Pi OS(Desktop) 64-bit– Raspberry Pi OS(Lite) 64-bit Front I/OPower1 x DC IN, 2-Pin 3.5mm spacing phoenix terminals with screw holes.It supports 9V~36V input, the signal is defined as VIN /GND.Audio(optional)1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LINE OUT.– When a headphone is connected, the audio output switches to the headphone.– When no headphone is connected, the audio output switches to the speaker.Note：Only ED-IPC2220 contains this interface.1000M PoE Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to accessthe network. PoE can be supported through expansion module.1000M Ethernet2 x adaptive 10/100/1000M ethernet ports, RJ45 connector. It can be used to accessthe network.USB3.0(optional)1 x USB3.0 ports, type A connector, support up to 5Gbps.Note：Only ED-IPC2210 and ED-IPC2220 contain this interface. Rear I/OSD Card Slot1 x Micro-SD card slot, uses to install SD card for storing user data.SIM Card Slot1 x Nano SIM card slot, uses to install SIM card for getting 4G or 5G signal.Micro USB1 x Micro USB port, supports to flash eMMC for the system. Side I/OHDMI1 x HDMI port, type A connector. It compatibles with HDMI2.1 standard and supports 4K 60Hz.USB2.02 x USB2.0 ports, type A connector, support up to 480Mbps.Antenna2 x SMA ports, use to connect 4G/5G antenna and Wi-Fi/BT antenna.User can select the antenna according to actual application. Buttons and IndicatorsReset 1 x Reset button, which can reset the device.PWR1 x red power indicator, uses to check the status of device power-on and power-off.4G/5G1 x green 4G/5G indicator, uses to check the status of 4G or 5G singal.ACT1 x green system indicator, uses to check the working status of device.USER1 x green user indicator, user can customize a status according to actual application. Expansion I/O12V 1A3 x DC OUT, 2-Pin 2.0mm spacing connector, support 12V 1A output. These pins are defined as GND/12V, reserve to provide power supply for extended LCD.5V 1A1 x DC OUT, 3-Pin 2.0mmspacing connector, support 12V 1A output. These pins are defined as GND/5V/GND, reserve to provide power supply for extended LCD.40-Pin GPIO1 x GPIO, 2×20-Pin 2.54mm pitch header, uses to lead out the GPIO ports of CM4.– These pins are defined as GPIO1~GPIO27/3V3/5V2/GND– Compatibles with expansion modules, and reserves to connect expansion accessories.10-Pin GPIO1 x GPIO Pin Header, 2×5-pin 2.54mm pitch header, uses to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND.CSI (optional)1 x Pin Header, 2×15-pin 0.4mm spacing connector, supports 2-Lane CSI signal.It can be used to connect 800M CSI camera.Note：Only ED-IPC2220 contains this interface.HDMI (optional)1 x FPC HDMI, 40-pin 0.5mm spacing FPC connector, which can be reserved to connect extended LCD, supports USB/I2C touch screen and backlight adjustment.Note：Only ED-IPC2220 contains this interface.DSI (optional)1 x FPC DSI, 30-pin 0.5mm spacing FPC connector, supports 4-Lane DSI signal.It can be reserved to connect extended LCD, supports USB/I2C touch screen and backlight adjustment.Note：Only ED-IPC2220 contains this interface.USB2 x USB 2.0, 5-pin 1.5mm spacing FPC connector, supports to expand the USB2.0 interface.PCIe1 x PCIe, Mini PCIe connector, supports to connect SSD.Speaker(optional)1 x PA output, 4-pin 1.5mm spacing connector, dual channel stereo audio output. It can be extended to connect two 4Ω 3W stereo speakers, these pins are defined as R /R-/L /L-.Note：Only ED-IPC2220 contains this interface. Expansion PerformanceEEPROMSupports 4K byte storage and improves the ease of use of device.CryptoAuthenticationIt can be matched to realize the required upper layer application and improves the security of device.RTCEnsure that the system clock is not affected by device power-off.Note：A CR1220 battery is provided by default in China.BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.Watch DogRealize the hardware Watch Dog based on the RTC alarm function to ensure the reliability of device. Electrical CharacteristicsInput Voltage9V ~ 36V DCPower Consumption24W (Max) Mechanical CharacteristicsDimensions143mm x 100mm x 35mm (WxDxH, DIN-rail and antenna are not included.)Weight 750gInstallationDIN-rail mounting WirelessWi-Fi(optional)2.4GHz and 5GHz dual-band Wi-Fi with antenna– 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n– 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/acBluetooth(optional)Bluetooth 5.0 with antenna, compatible with 2402MHz ~ 2480MHz frequency.4G(optional)Connect with various 4G LTE modules through the Mini PCIe interface.EC20-CN Module (China/India)LTE FDD: B1/B3LTE TDD: B38/B39/B40/B41TDSCDMA: B34/B39WCDMA: B1CDMA 1x/EVDO: BC0GSM: 900/1800MHEC25-AFX Module (North America)LTE-FDD:B2/B4/B5/B12/B13/B14/B66/B71LTE-TDDWCDMA: B2/B4/B5GSM/EDGE EC25-AUX Module (Latin America/Australia/New Zealand)LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28LTE-TDD: B40WCDMA: B1/B2/B4/B5/B8GSM/EDGE: B2/B3/B5/B8EC25-EUX Module (Europe/Middle East/Africa/Thailand)LTE-FDD: B1/B3/B7/B8/B20/B28ALTE-TDD: B38/B40/B41WCDMA: B1/B8GSM/EDGE: B3/B85G(optional)Connect with 5G module (RM500U-CN) through the M.2 B Key interface.5G NR: 3GPP Release 15/Release 16 NSA/SA operation, Sub-6 GHz5G NR NSA: n41/78/795G NR SA: n1/28/41/77/78/79Downlink 4 x 4 MIMO: n1/41/77/78/79LTE Category: Downlink Cat 12, Uplink Cat 13LTE-FDD: B1/2/3/5/7/8/20/28LTE-TDD: B34/38/39/40/41Downlink 2 x 2 MIMO: B1/2/3/5/7/8/20/28/34/38/39/40/41WCDMA: B1/2/5/8 Environmental & RegulatoryOperating Temperature-25°C ~ 60°CStorage Temperature-25°C ~ 60°CAmbient Humidity20% ~ 90% (non-condensing)CertificationsFCC FCC 47 CFR Part 15 Subpart B CEEN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3EN 55032/EN 55035/EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2System Block DiagramDimension Unit:mmOrder Information