Edatec IPC3020 based on Pi 5

DescriptionED-IPC3020ED-HMI3020 Series FeaturesFunctionsParametersCPUBroadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76RAM4GB and 8GB LPDDR4X-4267 SDRAM are optionalStorageSupport Micro SD Card and M.2 NVMe SSD storage expansionVideoDual 4Kp60 HDMI display outputAudioStereo audio input and output with separately 3.5mm audio jackInterface1 x Gigabit ethernet port with optional PoE, 2 x USB 3.0, 2 x USB 2.0, 1 x RS232, 1 x RS485 and 1 x BuzzerPower Input5V DC power input via USB-C, support ON/OFF power buttonOtherBuilt-in RTC, support SuperCAP and CR1220 battery backupOperating Temperature-25°C ~ 60°CMechanical102.8mm(W) x 89.5mm(D) x 32.5mm(H), 300g Fanless design with high-quality metal case and big heatsink, providing excellent cooling performanceDocument DownloadDatasheet DownloadSpecificationsSystemCPUBroadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76VPU4Kp60 HEVC decoderGPUOpenGL ES 3.1 & Vulkan 1.2Memory 4GB and 8GB LPDDR4X-4267 SDRAM are optionalStorageMicro SD Card Slot, supporting to select the 00GB/32GB/64GB SD card M.2 NVMe SSD, supporting to select the 00GB/128GB/256GB SSDSoftwareOperating System– Raspberry Pi OS(Desktop) 32-bit– Raspberry Pi OS(Lite) 32-bit– Raspberry Pi OS(Desktop) 64-bit– Raspberry Pi OS(Lite) 64-bitFront I/OAudio OUT1 x Audio Output(HPO), 3.5mm audio jack connector(green), stereo audio output.Audio IN1 x Audio Input(LINE IN), 3.5mm audio jack connector(red), supporting stereo audio input.RS4851 x RS485 port, 3-Pin 3.5mm spacing phoenix terminals with 120Ω terminal resistor. The signal is defined as GND/A/B.RS2321 x RS232 port, 3-Pin 3.5mm spacing phoenix terminals, the signal is defined as GND/TX/RX.USB 2.02 x USB 2.0 ports, dual layer type A connector, each channel supports up to 480Mbps.USB 3.0 2 x USB 3.0 ports, dual layer type A connector, each channel supports up to 5Gbps.1000M Ethernet1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network.PoE can be supported through expansion module.Rear I/OSD Card Slot1 x Micro SD card slot, which is used to install SD card. It supports booting the OS from SD card.Side I/OHDMI2 x HDMI ports, Micro HDMI connector, supporting 4K 60Hz.Power1 x power in port, USB Type-C connector, supporting 5V/5A DC power input.Buttons and IndicatorsON/OFF1 x power button, which is used to turn on and turn off the device.PWR1 x red power indicator, which is used to check the status of device power-on and power-off.ACT1 x green system indicator, which is used to check the working status of device.COM1~COM22 x green UART indicators, which is used to check the communication status of UART port.Internal I/O5V 1A1 x DC OUT, 3-Pin 2.0mm spacing WTB connector, supporting 5V 1A output. These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.Speaker1 x PA output, 4-Pin 1.5mm spacing WTB connector, dual channel stereo audio output. It can be extended to connect two 4Ω 3W stereo speakers, these pins are defined as R /R-/L /L-.MIPI CSI/DSI2 x MIPI CSI/DSI ports, 2-Lane CSI/DSI signal. They are reserved for connecting extended LCD screen, supporting I2C touchscreen and backlight adjustment.M.2 M1 x M.2 M port, M.2 M Key connector, using to connect SSD and other fast peripherals.It compatibles with M.2 2230, M.2 2242 and M.2 2260, supporting to boot the OS from SSD.Expansion PerformanceRTCRTC with SuperCAP and CR1220 battery backup, which can ensure that the system clock is not affected by device power-off.Note：A CR1220 battery is provided by default in China.BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.Electrical CharacteristicsInput Voltage5V DCMaximum Power Consumption25W(Max)Mechanical CharacteristicsDimensions102.8mm x 89.5mm x 32.5mm (WxDxH)Weight300gInstallationPlacing on the deskWirelessWi-FiDual-band 802.11ac Wi-FiBluetoothBluetooth 5.0 / Bluetooth Low Energy (BLE)Environmental & RegulatoryOperating Temperature-25°C ~ 60°CStorage Temperature-25°C ~ 60°CAmbient Humidity5% ~ 95% (non-condensing)CertificationsFCCFCC 47 CFR Part 15 Subpart B CEEN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3EN 55032/EN 55035/EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2System Block DiagramDimension Unit:mmOder Information